Issue After Reboot

[Gang Gong Moy]

That's good to know; thanks. I'll give it another try later on.


________________________________
 From: "Thomas, Chris" <CThomas at medplus.com>
To: "Gang Gong Moy (gmoy8888 at yahoo.com)" <gmoy8888 at yahoo.com> 
Cc: "entropykey-users at lists.simtec.co.uk" <entropykey-users at lists.simtec.co.uk> 
Sent: Friday, January 6, 2012 4:20 PM
Subject: RE: Issue After Reboot
 

 
You can ignore the /var/run stuff.  A couple of potential gotchas to check whenever you decide to get back to it.
 
1)      Make sure that your line with ttyACM0 starts with “AddKey” (singular not plural.)
2)      If you commented the previous line, use “--“ for comments, not “#”.
 
Just stuff we ran across in having different people installing them.
 
Chris Thomas
MedPlus, A Quest Diagnostics Company| Senior Unix Administrator | 4690 Parkway Drive | Mason, OH 45040 USA | phone +1.513.204.2711 | cthomas at medplus.com | www.medplus.com 
 
From:Gang Gong Moy [mailto:gmoy8888 at yahoo.com] 
Sent: Thursday, January 05, 2012 11:29 PM
To: Thomas, Chris
Cc: entropykey-users at lists.simtec.co.uk
Subject: Re: Issue After Reboot
 
I tried using "/dev/ttyACM0", but ekeyd seemed unable to recognize it; ekeyd.conf also refers to "/var/run/entropykeys", which is not created after a reboot.
 
Since my Linux box is rarely rebooted, I'll come back to this issue some other time. It's hardly a show-stopper now.
 
Thanks for the suggestions.
 

________________________________
 
From:"Thomas, Chris" <CThomas at medplus.com>
To: Gang Gong Moy <gmoy8888 at yahoo.com> 
Cc: "entropykey-users at lists.simtec.co.uk" <entropykey-users at lists.simtec.co.uk> 
Sent: Thursday, January 5, 2012 4:02 PM
Subject: RE: Issue After Reboot
It’s because the udev rules don’t work in RHEL/CentOS which are supposed to create a symlink in /dev/entropykey that the default ekeyd config is looking for.  One way around it if you are only going to use one key in the system is to change /etc/entropykey/ekeyd.conf to have a line “AddKey /dev/ttyACM0” rather than the default one of “AddKeys /dev/entropykey”.  (Make sure to put the device path in quotes.)  This avoids the whole issue of udev not creating the link on boot.  Maybe one of these days I’ll fix the udev rules.
 
Chris Thomas
MedPlus, A Quest Diagnostics Company| Senior Unix Administrator | 4690 Parkway Drive | Mason, OH 45040 USA | phone +1.513.204.2711 | cthomas at medplus.com| www.medplus.com
 
From:entropykey-users-bounces at lists.simtec.co.uk [mailto:entropykey-users-bounces at lists.simtec.co.uk] On Behalf Of Gang Gong Moy
Sent: Thursday, January 05, 2012 1:21 PM
To: entropykey-users at lists.simtec.co.uk
Subject: Issue After Reboot
 
I received the entropy key recently and I've been generally impressed by it. One minor question that has come up is whether the USB driver fails to detect and connect to the device after a reboot. 
 
I'm using Centos 5.4. If I perform a reboot with the device attached to the computer, then it doesn't seem to work properly. The 'ekeydctl list' command shows nothing running after the reboot and "entropy_avail" is low. On the other hand, if I plug in the device after the boot up completes, everything works normally.
 
 




Confidentiality Notice: The information contained in this electronic transmission is confidential and may be legally privileged. It is intended only for the addressee(s) named above. If you are not an intended recipient, be aware that any disclosure, copying,
 distribution or use of the information contained in this transmission is prohibited and may be unlawful. If you have received this transmission in error, please notify us by telephone (513) 229-5500 or by email (postmaster at MedPlus.com). After replying, please erase it from your computer system.

_______________________________________________
EntropyKey-users mailing list
EntropyKey-users at lists.simtec.co.uk
http://lists.simtec.co.uk/cgi-bin/mailman/listinfo/entropykey-users






Confidentiality Notice: The information contained in this electronic transmission is confidential and may be legally privileged. It is intended only for the addressee(s) named above. If you are not an intended recipient, be aware that any disclosure, copying, distribution or use of the information contained in this transmission is prohibited and may be unlawful. If you have received this transmission in error, please notify us by telephone (513) 229-5500 or by email (postmaster at MedPlus.com). After replying, please erase it from your computer system.

_______________________________________________
EntropyKey-users mailing list
EntropyKey-users at lists.simtec.co.uk
http://lists.simtec.co.uk/cgi-bin/mailman/listinfo/entropykey-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.simtec.co.uk/pipermail/entropykey-users/attachments/20120106/685ab69a/attachment.html>